Mexico. Dielsa presented the new Passive Receiver Concentrator with power supply, the new NV-16PS13-PVD from Bosch. The new NVT NV-16PS13-PVD has 16 channels, it is a key hybrid component that consolidates all the wiring of the analog system using structured cabling for buildings standard EIA/TIA 568B.
Designed primarily for cost reduction, Dielsa presents the versatile Passive Receiver Concentrator with power source designed to be installed in IDF/telecommunications or MDF cabinets/equipment room. This concentrator with video transceivers with power supply has selectable outputs regardless of:
24VAC – OFF - Perfect for Fixed Cameras
28VAC – Ideal for PTZ Cameras
With the above they can withstand camera loads at the distance of up to 1Amp per channel (10Amps. Overall). In addition, it reduces costs, by avoiding installing several electrical outlets per camera or various additional power sources for coaxial cable, in order to cover longer distances.
Carlos Garza, Commercial Director of Dielsa commented, "The use of the right power supplies are a factor that responds directly to the biggest problem of our customers, it is about taking care of their investment by using smarter technology, which ultimately translates into advantages and benefits," he said.
A hub with integrated passive transceiver allows connection to the DVR or an encoder for IP transmission. Channel diagnostic LEDs show load/no load conditions, wiring defects or failure at a glance.
Fault protection with automatic reset, transient peak protection, and individual floating free ground loop outputs.
Features:
It supplies SELV Class 2 power to the camera and simultaneously receives video transmission and supplies P/T/Z telemetry, all over a single Cat5e 4-pair cable.
Standard plugs for structured telecommunications cabling/data communication according to EIA/TIA 568B
Independent selection of 24VAC - OFF - 28 VAC with 1 Amp max. per channel
Fault protection with automatic readjustment; protection against transient peaks
Individual floating outputs ensure full immunity for ground loops
Diagnostic LED diodes show load/no load conditions, wiring defects and overload
Use with the NV-216A-PV or NV-218A-PVD transceiver in the camera
Supplies power to cameras via UTP over distances
1U height; 30cm deep; can be mounted on wall, desk or rack
Lifetime Warranty
